LICENSE # 28303

Cost of an air conditioning unit 2022

Most people don’t think about the cost of an air conditioning unit until they need one. If your air conditioning is more than 10 years old, it may be time to consider replacing it. Although replacing or repairing an ac unit may seem expensive, it can also save you money on your energy bill and may even qualify for tax credits through local or federal rebates. I know you’re thinking ” hey ill just do the project myself to cut costs” We recommend you don’t. There are many projects you can do around your home by yourself. Installing A new AC unit shouldn’t be one of them unless you are highly trained and certified. Ac unit cost will vary depending on 6 major factors.

  1. The size of your home
  2. The size of the unit
  3. The efficiency of the unit
  4. Current ductwork
  5. Brand of unit
  6. type of system

The size of your home

The size of your home is an important factor in regards to an ac unit cost

The Size of your home is probably the most important factor in the cost of an ac unit. The size of your home will help you determine the size of the ac unit you need. There are a few ways to calculate the square footage of your home. One is to measure the exterior dimensions of your house and then multiply by the height. This will give you the total for your home. Another way is to measure all the interior dimensions of your house and then add them up. This will give you the total square footage of your home’s interior. A third way to calculate the square footage of your home is to measure all the rooms and then add them up. This will give you an estimate of the total square footage of your home. Whichever way you choose, be sure to use a calculator or conversion chart to convert any measurements from feet to inches or vice versa. This step will help you with choosing the size of your new ac unit.

The size of the unit

The size of the unit is very important with regards to the costs of an ac unit. When calculating ac size, there are two important factors to consider: the square footage of the room and the tonnage of the ac.

What is tonnage?

Tonnage is a term used in the HVAC industry to measure the cooling capacity of an AC unit. It is calculated by multiplying the unit’s airflow by its refrigeration capacity. For example, an ac unit with an airflow of 1,000 cubic feet per minute (CFM) and a refrigeration capacity of 10 tons would have a tonnage rating of 10,000. Tonnage is important to consider when sizing an AC unit, as it determines how much cooling power the unit can provide. A higher tonnage rating means more cooling power.

To determine the necessary AC unit size, you can use this formula:

AC unit size = (sq ft. of room) / (tons of AC unit)

For example, if you have a room that is 150 sq ft., you would need an AC unit that is 1 ton or less. If your room is 300 sq ft., you would need an AC unit that is at least 2 tons. Keep in mind that these are general guidelines; you may need a larger or smaller AC unit depending on the specific needs of your home.

If you’re not sure which size is right for your space, it’s best to consult with a professional HVAC company such as; Northeast Ohio HVAC LLC. They can help you determine the right size and type of AC unit for your needs. The size of your unit is important when calculating an ac unit cost but there are more things you need to consider, like The efficiency of the unit.

The efficiency of the unit

The efficiency of an ac unit is one of the most important factors to consider. An inefficient ac unit will use more energy and cost more money to operate which will affect ac unit cost. There are a few ways to measure the efficiency of an ac unit. The first is the Energy Star rating. An ac unit that has earned the Energy Star rating must meet certain standards for efficiency, as set by the Department of Energy. Another way to measure the efficiency of an ac unit is with the SEER rating. This rating measures the cooling capacity of an air conditioner and is expressed in terms of how many BTUs it can remove from the air per hour. The higher the SEER rating, the more efficient the ac unit.

When shopping for an air conditioner, it is important to consider both the Energy Star rating and the SEER rating. Air conditioners with a higher SEER rating may cost more initially, but they will save you money in the long run because they are more efficient. If you are looking for an energy-efficient air conditioner, be sure to look for one that has both an Energy Star rating and a high SEER rating.

Current ductwork

Ductwork helps circulate conditioned air throughout your home. To properly cool your home, your ductwork must meet your new system’s airflow requirements.

Your ductwork is one of the most important components of your cooling system. Ducts not only deliver conditioned air throughout your home, but they also help to circulate that air evenly. If your ductwork isn’t up to par, your new cooling system may not work as efficiently as it should.

That’s why it’s so important to have your ducts inspected and evaluated before you install a new cooling system. An HVAC contractor can help you determine if your ducts are adequate for your new system and make any necessary adjustments. If your ducts need repair or replacement, that can be taken care of before your new system is installed.

Brand of unit

There are a lot of different air conditioning brands on the market these days. Some of the more popular ones include Carrier, Comfortmaker, Trane, and Lennox. Each brand has unique features and benefits, so it can be tough to decide which one is right for you. They range in different prices. the brand you choose will affect the ac unit cost as well as cost to install.

Type of system

There are four major types of air conditioning systems;

  1. window ac units
  2. central air conditioner systems
  3. portable ac units
  4. ductless mini-split
Window air conditioners

window air conditioners are the most popular type of AC unit. They are easy to install and are perfect for cooling a single room. A Window ac unit can be expensive to operate, so be sure to factor this in when calculating ac unit cost.

Central air conditioning systems

A central air conditioning unit is the best choice for cooling an entire home. Most people prefer a central ac unit for comfort and efficiency. A central air conditioner uses ductwork to distribute cooled air throughout the house. A Central air conditioner is more expensive to install than window units, However, when you install central air it is more efficient and can save you money on your energy bills. If choosing central air conditioning as your choice, Northeast Ohio HVAC LLC can assist you with ac unit cost, central air conditioner installation, information on a central air system, and any other matters in regards to an central ac unit.

Central ac units provide cooled or heated air to an entire house by circulating cooled or heated refrigerant through a system of ducts. The ducts are usually placed in the attic, basement, or crawlspace. Central ac units are used more often in warm climates and is becoming increasingly popular in cold climates.

A central air ac unit system usually consists of three parts: the outdoor condensing unit, the indoor evaporator coil, and the blower assembly. The outdoor condensing unit contains a compressor that circulates refrigerant through the system. The compressor is connected to the indoor evaporator coil by copper tubing. The evaporator coil converts liquid refrigerant to a gas, which cools the air as it passes over the coils. The cooled air is then blown into the house by the blower assembly.

A central ac unit should be installed by a qualified technician. Improper installation can cause the unit to work inefficiently and may even damage the equipment. A central ac unit should be inspected and cleaned every year to ensure that it continues to operate at peak efficiency. Cost to install a central ac unit can vary. At Northeast Ohio HVAC LLC we install central air at a very competitive price. Keep us in mind when choosing a central ac unit.

Portable AC units

Portable ac units are a great option for renters or people who live in hot climates. Portable AC units can be moved from room to room as needed and some models even include heating capabilities. While portable AC units are more expensive than a window ac unit , they are more efficient and can save you money on your energy bills.

Ductless mini-split AC systems

Ductless mini-split systems are a great option for homes that do not have ductwork. These systems use a small indoor unit to cool the room and an outdoor unit to expel the hot air. Ductless mini-split AC systems are more expensive to install than window units, but they are more efficient and can save you money on your energy bills.

Those are the 6 major factors that determine the cost of an ac unit. However, other factors also contribute to the cost of an a/c unit. These factors include;

  1. Permit fees
  2. Line set protection
  3. Condensate drainage
  4. Electrical costs

permit fees

In most cases, the cost of a permit to install or replace an HVAC system in Cleveland, Ohio will be around $50. However, this fee may vary depending on the city or municipality in which you live. Be sure to check with your local government office to get an accurate estimate of the permit fee.

line set protection

Line set is the copper tubing that connects your outside air conditioning system to your indoor system. Line set protection is an important part of keeping your air conditioning unit running properly. If the line set becomes damaged, it can cause the entire unit to break down. That’s why it’s important to have a protector in place to keep the lines safe. There are a few different types of line set protectors available, and it’s important to choose the right one for your unit.

condensate drainage

Your AC unit produces condensation as a by-product of the refrigeration process. This condensation needs to be drained away from the unit, or it will cause damage. There are a few different ways to drain condensation from an ac unit. Condensate drainage is a process that removes water vapor from the air . The water vapor is collected in a condensate pan, where it drips down into a drain line. The condensate drainage system must be properly installed and maintained in order to function correctly.

If the condensate drainage system does not work properly, it can cause damage to the system and lead to mold growth. It is important to have a qualified technician inspect and maintain your condensate drainage system on a regular basis.

There are several components of a condensate drainage system, including the:

• Condensate pan

• Drain line

• Trap

• Sump pump

• Check valve

The condensate pan is the primary component of the drainage system. It is a metal or plastic container that is installed in the lower part of the system. The drain line connects the condensate pan to the sewer or septic system.

The trap is a U-shaped pipe that is installed in the drain line. It prevents foul odors from entering the system. The sump pump is a device that pumps water out of the condensate pan and into the sewer or septic system. The check valve prevents water from flowing back into the HVAC system when the sump pump is not working properly.

electrical costs

You may not need to make any electrical adjustments. However, if you do, there are a few typical locations:

Replacing the control wiring on a new thermostat

High-voltage wiring and breakers at the electric panel that provides electricity to your new air conditioner

Older systems do not have modern thermostats with the degree of air control that you may desire. In those situations, electrical upgrades are required to ensure that your new system performs properly.

Electrical modifications can significantly increase the cost of a project, depending on its complexity.

Without the appropriate licensing and expertise to obtain it, you risk jeopardizing the quality and efficiency of your installation and air conditioning system.

The total cost of replacing an air conditioner

When an air conditioner breaks down, a new unit has to be bought and installed. The initial cost of buying and installing a new unit may range from an average price of $4,350 to $12,095 in the United States. This includes labor costs and permit costs.

That may appear to be a large gap, but it corresponds to the wide range of variables and alternatives available to a homeowner, as we previously discussed. However, we can reduce this range a little further.

An ac system is usually divided into the following three categories:

  • Entry-level

  • Mid-range

  • High-end

Single-stage cooling is offered by an entry-level ac system. If you’re on a budget or don’t intend to stay in your house for an extended period, they’re a trustworthy cooling option.

The cost of an entry-level air conditioner varies from $4,350 to $8,000.

Two-stage cooling is a feature of a mid-range ac system. A mid-range ac system is more efficient, making them ideal for people who intend to stay in their homes for an extended period.

The average cost of a mid-range air conditioner is between $6,200 and $9,500.

A high-end ac unit uses variable-speed cooling. A high-end ac unit might be ideal if you want to deal with several issue areas in your home since they give you the most control over your system.

The cost of a high-end air conditioner might range from $8,200 to $12,095.

When it comes to the cost of replacing an air conditioner, there are a few important things to remember.

First, the cost varies depending on the type of air conditioner you choose. Second, the cost includes both the initial purchase price and installation costs. Third, many factors can affect the total cost, such as electrical upgrades and permits. Finally, it’s important to remember that not everyone needs to make these upgrades to install a new air conditioner. An ac unit can come in a variety of types and sizes, so be sure to choose the one that best suits your needs.

Replacing an air conditioner is a major expense, but it can provide significant benefits for homeowners. By choosing the right air conditioner and making the necessary electrical upgrades, homeowners can ensure that their new system is installed properly and runs efficiently. Replacing an air-conditioning unit is a significant investment. make sure to factor air conditioner costs, cost to install, types of systems; such as a central ac unit, is it an old or new ac unit, your existing ductwork.

Don’t hire any old HVAC company, hire NEO HVAC!

At Northeast Ohio HVAC LLC we strive to be competitive with regards to the pricing in the Cleveland, Ohio area for the Cost of ;

  1. Air conditioning unit
  2. Heating and cooling systems
  3. Indoor air quality
  4. Ac installation
  5. Indoor air handlers
  6. Single stage ac unit
  7. Two stage ac unit
  8. New air conditioner cost
  9. Air conditioner replacement
  10. variable speed air conditioners
  11. New ac units
  12. central air conditioners
  13. energy efficiency unit

    We also offer a variety of finance options to assist with air conditioning cost and installation costs.


There are a few different ways to finance your new HVAC system. You can use cash, financing through the manufacturer, a loan from a bank or credit union. Or directly through Northeast Ohio HVAC LLC partner RTO National.

Cash is always an option, but it might not be the best one. If you don’t have the cash on hand to cover the cost of a new system, you’ll end up paying interest on top of the purchase price.

Financing through the manufacturer can be a good option, especially if there’s a promotion or rebate available. The interest rates are usually lower than what you’d find at a bank or credit union, and you typically have more time to pay off the loan.

A loan from a bank or credit union can also be a good option. You might be able to get a lower interest rate than you would through the manufacturer, and you can usually choose a longer repayment term. Just make sure you shop around for the best deal.

About Our financing partner

RTO National is committed to the success of our dealers, customers and communities. Using state-of-the-art technology, data, analytics, and support, we provide an industry-leading suite of products and services that allow our dealers to meet the needs of more customers faster and simpler. To see qualifications for a central a/c unit, heating system, ac system, follow this link

We are the largest provider of lease and installment contracts for backyard storage units, HVAC systems, boatlifts, carports, and tankless water heaters. Operating across the continental U.S., we partner with independent dealers of backyard sheds, carports, other structures, HVAC systems, tankless water heaters, and boatlifts to provide the best solutions for their customers. RTO National’s strategy, as our tag line relays, is simple – to make our independent dealers successful and exceed both their expectations as well as our customers’.


Northeast Ohio HVAC LLC a licensed HVAC contractor is a well-established and reliable provider of heating, ventilation, and air conditioning (HVAC) services in Northeast Ohio. We have been providing quality HVAC services to homeowners and businesses in the area for more than 10 years, and we are dedicated to ensuring that our clients receive the best possible service at the most affordable price.

Our team of experienced and qualified technicians can provide you with a wide range of HVAC services, including installation, repair, and maintenance. We also offer a variety of products and services, including install of central air conditioning, heating systems, cooling systems, ductless split systems, humidifiers, dehumidifiers, and air filters. We strive to help reduce energy costs. We are proud to offer some of the most competitive prices in the area, and we are always available to answer any questions you may have about ac unit costs, energy costs, and all of our products and services.

If you are looking for a reliable and affordable HVAC provider in Northeast Ohio, please contact us today. We would be happy to discuss our products and services with you.